LEVELS – tagged "L1" – MICROBLADING ART Google Maps Multiple Markers


689266589775   December 12, 2018 11:34

The end point of left brow is too hight. MInor difference and still can be passed.

669258580047   December 12, 2018 11:18

Both brows should be symmetrical and at the same hight.

5468633037   November 23, 2018 23:50

This symmetry is sufficient to be passed.

5468633037   November 16, 2018 12:26

Please follow instructions of the task. 

These are really beautiful brows, however you should draw a sample on the paper of artificial skin as shown in the task.

653975584847   November 16, 2018 12:14

You have been elevated to the next level. There are minor symmetry problems, however the precision is sufficient.

4941612045   November 9, 2018 13:46

These shapes are really good. To pass to the next level, however, there should be no difference when it comes to the heights of the points of the brow. At the moment the tail section of one brow drawing is clearly thicker than the other and that would lead to brows being a bit asymmetrical.

5454277837   October 18, 2018 00:15

It can be passed.

However, it should be taken into account that in Light microblading the pt no 3 is drawn much higher, almost to the same horizontal line from pt no 1. 


669308813391   October 17, 2018 23:55

Please send a picture as in the task: one pair of brow outline. 

This is a sheet filled with outlines filled with patterns. 

6367339533   September 30, 2018 18:54

Cannot be elevated to next level because this picture does not represent symmetry as seen in the sample pictures. Please draw a symmetrical pair of brows on paper or to the artificial skin. Thank You!

665692307535   September 27, 2018 12:57

This picture, unfortunately, cannot be passed for symmetry because the brows are already done. Although, the result absolutely beautiful - the symmetry should be drawn to a paper or latex :)

678861045839   September 27, 2018 12:47

You have been elevated to the next level.
Still please keep in mind that the beginnings should be the thickest part of the brow! Here those are a bit too thin. However, symmetry is correct.

666938900559   September 19, 2018 03:02

There are minor flaws in your symmetry. Still, it is close enough to get passed.

633635602511   September 19, 2018 02:36

You are elevated to the next level because there were no problems with symmetry.

However, there was a problem with the brow growing thicker in the center and beginning lines being too short. 

Please always make longer beginning lines because then it will not affect the thickness of the brows. 

342766354472   September 19, 2018 01:26

These outlines are not perfectly symmetrical. The highest point of the right brow is higher. 

Please, always double check the symmetry (in the end also using applications).

342766354472   August 30, 2018 09:49

First of all, for the first task, please draw just outlines - no filling is needed.

However, we examined the outlines and there is a bit too large difference between the highest points of the brows in this case. You can clearly do perfect outline, as otherwise the brows shape looks very good. 

Thus, please provide a picture with just symmetrical outlines, without any filling.

644693885007   August 16, 2018 11:00

This is really good. Always measure on INSIDE of the lines to check symmetry. Minor flaws around pt 2 - still passed to next level.

7181317901   August 16, 2018 10:48

Yes, you are progressed to next level. However, there are minor problems with the symmetry around the highest point of the brow (2). When measuring symmetry with apps etc, always concentrate on the shape INSIDE the frame lines.

587568316495   July 13, 2018 11:24

This is really good work! You will be elevated to the next level. Suggestions to avoid even small incorrections:

1. Always use applications to detect vertical differences.
2. Always measure on the INSIDE of the brow outlines. 
3. Reserve more time for drawing phase to get it done flawlessly!

You are elevated!

591386935375   July 13, 2018 11:05

This is really good work! Still to be elevated to the next level there can be no such differences of the VERTICAL hight of the points of the brow. Suggestions:

1. Always use applications to detect vertical differences.
2. Always measure on the INSIDE of the brow outlines. 
3. Reserve more time for drawing phase to get it done flawlessly!

Just make a one drawing that is absolutely symmetrical and you will be elevated to the next level!


591386935375   July 3, 2018 00:38

It was possible to pass you to next level, however there are minor mistakes in both brow outlines. Please always double-check everything!

587568316495   June 18, 2018 15:21

So sorry there is a minor incorrection in the brow on the left. When it comes to shape symmetry everything has to be absolutely exact! Please always check the symmetry, especially in the tail section of the brow. Everything around the pt no 6 is very crucial! 


You are a great artist and I'm sure you'll be escalated soon! 

584933474383   June 18, 2018 14:33

I'm so sorry - cannot pass this brow symmetry. There is a problem with the lower line of the brow on the right: point no 3 is too high. In the brow on the right pt no 6 is not the highest point of the lower line! 

You are an incredible artist - please just correct this small problem!

586337943631   June 18, 2018 13:54

You have been elevated to the next level.

This symmetry is done correctly.

587548524623   June 18, 2018 12:57

Elevated to next level. Suggestion: in practice the height on pt no 3 should always in between the horizontal lines from 1 and 4. It should never be heigher than 1.

6763441933   June 3, 2018 13:08


6898565325   April 26, 2018 22:21

Not perfect but escalated to level 2. 

The end of brow should be little bit lower.


5067196941   April 13, 2018 13:56

OK - symmetrical. Escalated to the next level.

Little bit ttoo dramatical brows. Make the end of the brow little bit lower.

326909231144   April 13, 2018 13:52

OK. Escalated to the next level.

383740936232   April 13, 2018 13:44

Escalated to the next level.

6763441933   April 7, 2018 14:25

As you can see from the picture shapes are not symmetric. Some points are in different level and not within the limits. 

Left shape is wider from the middle than from the beginning - that is not correct.

Please try again.

383740936232   April 7, 2018 13:58

Not passed. Some little symmetry errors. One shape is shorter also.

Symmetry is measured always from inside the lines.

5067196941   April 4, 2018 13:31

Not symmetric - try again. Try to make the shape like in the sample in Level 1. 

Try to make the lines thinner and send only one pair of brows. 

Remember that symmetry is always measured inside the lines.

6607399053   April 4, 2018 13:26

Within the limits and escalated to the next level.

6763441933   April 3, 2018 10:31

Little symmetry error. Shapes are not the same eihter. Try again.

20452048909   March 30, 2018 10:37

Passed to the Level 2.

7161382221   March 30, 2018 10:23

OK- Passed to the next level. 

Notice - on brow is still little bit shorter, you can measure it yourself from the picture. That may also be becaus of the angle the photo is taken or something so it is within the limits. 🙂 

5183333901   March 30, 2018 10:00

Passed to the next level.

Try to make thinner shape lines.

386360836136   March 28, 2018 17:53

Passed to the next level.

One brow is shorter. Symmetry is always measured inside the shape lines.

When you begin to make the pattern then all the lines are going until the shape line and after you whipe of the shape lines the result must be the same. If they are not entirely symmetric inside then the brows will be different.

435552452648   March 28, 2018 17:32

OK - passed. In some points ( nr 1, 3, and 4) ittle differences in height but within the limits Right is little bit shorter also. Symmetry is measured inside the lines.

6626398989   March 26, 2018 23:10

It is symmetric and you are escalated to the next level.

6028197965   March 26, 2018 23:02

If you measure yourself then can see that one brow is shorter. Maybe it is because you did not made the picture from the middle but please check it.

Other parts are symmetric.

Shape is not perfect this time though.

386360836136   March 25, 2018 09:03

Not passed. Try again.

6028197965   March 22, 2018 22:33

One brow is shorter. Symmetry is measured inside the lines. Please check the sample picture and follow the sample in Level 1.

5317497293   March 22, 2018 22:31

OK - passed.

326909231144   March 22, 2018 22:09

Both ends are in too high, point nr 6 should be between 1 and 4 (height).

One brow is shorter than other. Try again.

6028197965   March 21, 2018 09:56

Some points are not at the same level and one brow is shorter than the other. Not passed.

6028197965   March 19, 2018 15:38

Not entirely symmetric. One is shorter (take the photo from the middle exactly).

Some points are not in the same level. 

Symmetry is measured from inside the lines.

6626398989   March 19, 2018 15:31

Not entirely symmetric. One is shorter and some points are not in level. 

Symmetri is measured inside the lines.